MiniPod Receiver Operation Manual
RFR-101G-8000/1
__________________________________________________________________________________________________________
___________________________________________________________________________________________________________
Page
8
of
18
3.
Software Operation
Initial Configuration
When the software is run for the first time the following screen will be displayed
At first run, no MiniPods are approved to connect to the receiver. Therefore, when a new
MiniPod attempts to connect to the receiver, the following prompt will be displayed
If the MAC address displayed matches the MAC address (as printed on the MiniPod
Label) of a Mini
Pod that you wish to receive data from then press ‘Yes’. Once approved,
this MiniP
od will be added to an ‘Approved’ list
. You will no longer be prompted when
this MiniPod connects in the future.
If you do not recognise the M
AC address displayed then press ‘No’, this device will then
be added to a ‘Blocked’ list
. The MiniPod will be removed from the network if it attempts
to reconnect in the future.
Summary of Contents for 101G
Page 1: ...MiniPod Receiver Operation Manual ...
Page 18: ......
