MiniPod Receiver Operation Manual
RFR-101G-8000/1
__________________________________________________________________________________________________________
___________________________________________________________________________________________________________
Page
10
of
18
The software must be restarted after initial configuration to ensure correct operation
Once the above process has completed, the software must be shut down and then
restarted to ensure all connected pods are set up correctly for reliable operation.
After initial configuration, the system will not be configured to output any of the
received GPS data.
Normal Operation
Each time the software is launched, the system will allow any connected pods to
stabilise RF data transmissions, which may initially result in checksum errors. Once all
the connected pods have stabilised, the network will be configured. Information will be
displayed in the message window to confirm this.
Main Display
The main display consists of the menu, a toolbar, a pod list area and a system
message area.
Summary of Contents for 101G
Page 1: ...MiniPod Receiver Operation Manual ...
Page 18: ......
