4
114
F
ADJUSTING AIR FLOW DIRECTION
•
Adjust the air flow direction properly otherwise, it might cause discomfort
or cause uneven room temperatures.
•
Adjust the horizontal louver using the remote control.
•
Adjust the vertical louver manually.
Adjusting the Vertical Air Flow Direction (up - down)
The air conditioner automatically adjusts the vertical air flow direction in accor-
dance with the operating mode.
To set the vertical air flow direction
Perform this function while the unit is in operation. Press the SWING button on the
remote control to move the louver, and press it again when the louver gets to the
desired direction.
•
Adjust the vertical air flow direction to the desired direction.
•
When starting operations, the vertical air flow is automatically set in the
direction written in micro-processor.
To set the horizontal air flow direction (left - right)
Adjust the vertical louver manually using the lever on the left or right side of the
vertical louver arm (depending on model). Take care not to catch fingers on the
fan, horizontal louver or to damage vertical louvers.
When the air conditioner is in operation and the horizontal louver is in a specific
position, move the lever at left (or right, depending on model) end of the air out-
let to the desired position.
To automatically swing the air flow direction (up - down)
Perform this function while the air conditioner is in operation. Keep pressing the SWING button on the
remote control for more than 2 seconds, the horizontal louvers swing automatically.
•
To stop the function, press the SWING button once again.
G
CAUTION
• The SWING buttons will be disabled when the air conditioner is not in operation.
• Do not operate the air conditioner for long periods with the air flow direction set downward
in cooling or dry mode. Otherwise, condensation may occur on the surface of the horizontal
louver causing moisture to drop on to the floor or furnishing.
• Do not move the horizontal louver manually. Always use the SWING button. If you move this
louver manually, it may malfunction during operation. If the louver malfunctions, stop the air
conditioner once and restart it.
• When the air conditioner is started immediately after it is stopped, the horizontal louver might
not move for approximately 10 seconds.
• Open angle of the horizontal louver should not be set too small, as Cooling or Heating
performance may be impaired due to too restricted air flow area.
• Do not operate unit with horizontal louver in closed position. When the air conditioner is
connected to power (initial power), the horizontal louver may generate a sound for 10
seconds, this is a normal operation.
• When the air conditioner is connected to power (initial power), the horizontal louver may
generate a sound for 10 seconds, this is a normal operation.
Range
fig. 6
man_AAC design 11000_1.qxd 07-03-2008 14:22 Pagina 114
