2. Push
the
▲
or
▼
button to set the desired room temperature. The most comfortable temperature set-
tings are between 21ºC to 28ºC.
3.
Push the
On/off
button to start the air conditioner. The OPERATION lamp on the display panel of the
indoor unit lights. The operating mode is AUTO. The FAN SPEED is automatically controlled.
4. Push
the
On/off
button again to stop the unit operation.
COOL, HEAT, and HEALTH (Fan only) Operation
1.
If the AUTO mode is not comfortable, you may manually override the settings by using COOL, DRY,
HEAT (HEAT PUMP units only) or HEALTH modes by pressing button
b
.
2. Push
the
▲
or
▼
button (
c
and
d
) to set the desired room temperature. When in COOLING mode, the
most comfortable settings are 21ºC or above. When in HEATING mode, the most comfortable settings
are 28ºC or below.
3. Push
the
Fan Speed
button
e
to select the FAN mode of AUTO, HIGH, MED or LOW.
4. Push
the
On/off
button
a
. The operation lamp lights and the air conditioner starts to operate per your
settings. Push the
On/off
button
a
again to stop this unit operation.
DRY Operation
1. Push the
Mode
button
b
to select DRY.
2. Push the
▲
or
▼
button (
c
and
d
) to set the desired temperature from 21ºC to 28ºC.
3. Push the
On/off
button
a
. The operation lamp lights and the air conditioner starts to operate in the DRY
mode. Push the
On/off
button
a
again to stop this unit operation.
TIMER Operation
Push Timer on/off button (
i
and
j
) to set the on and off times of the unit. The effective operation time
set by the remote controller for the timer function is limited to a period of between 0.5 and less than 24
hours.
1.
To set the STARTING time.
1.1 Push the
Timer on
button
i
, then the remote controller display shows
ON TIMER
, the last set time for
the starting operation and the signal "
Hr
" will be shown on the digital display area. You are now ready
to reset the time to START the operation.
G
NOTE!
Due to the difference of the set temperature of the unit and the actual indoor temperature, the
Air Conditioner when in DRY mode will automatically operate many times without running the
COOL and FAN mode.
G
NOTE!
The HEALTH mode cannot be used to control the temperature. In this mode, only steps 1, 3 and 4
are applicable.
G
NOTE!
• In the AUTO mode, the air conditioner can logically choose the mode COOL, FAN, HEAT and
DRY by sensing the difference between the actual ambient room temperature and the set
temperature on the remote controller.
• If the AUTO mode is not comfortable for you , the desired mode can be selected manually.
4
111
man_AAC design 11000_1.qxd 07-03-2008 14:22 Pagina 111
