4
112
1.2 Push the
Timer on
button
i
again to set desired unit start time.
1.3 After setting the
Timer on
,there will be half a second delay before the remote controller transmits the
signal to the air conditioner. Then, after approximately another 2 seconds, the signal "h" disappears
and the set temperature will re-appear on the digital display.
2. To set the STOPPING time.
2.1 Push the
Timer off
button
j
and the remote controller display will show
OFF TIMER
and the last set
time for the timer off operation in hours will be shown on the Timer display area. You are now ready
to reset the time of the STOP operation.
2.2 Push the
Timer off
button
j
again to set the time you want to stop the operation.
2.3 After setting the
Timer off
, there will be half a second delay before the remote controller transmits
the signal to the air conditioner. Then, after approximately another 2 seconds, the signal "h" disappe-
ars and the set temperature will re-appear on the digital display.
3. Set the starting & stopping time
3.1 Push the
Timer on
button
i
, the remote controller display will show
ON TIMER
, the last set time for
Timer on
operation in hours will be shown on the Timer display area. You are now ready to readjust
the
Timer on
to start the operation.
3.2 Push the
Timer on
button
i
again to set the time you want to start the operation.
3.3 Push the
Timer off
button
j
, the remote controller will show
OFF TIMER
, the last set time for STOP
operation and the signal "Hr" will be shown on the Timer display area. You are now ready to set the
time to STOP operation.
3.4 Push the
Timer off
button
j
again to set the time you want to stop the operation.
3.5 After setting the TIMER, there will be half a second delay before the remote controller transmits the
signal to the Air Conditioner. Then, after approximately another 2 seconds, the signal "h" disappears
and the set temperature will re-appear on the digital display.
D
SPECIAL FUNCTION
Follow Me function
The remote control serves as a remote thermostat allowing you to precisely adjust the temperature at the loca-
tion of the remote control near you.
G
WARNING
• Keep the Remote Controller away from all liquids.
• Protect the Remote Controller from high temperatures and exposure to radiation.
• Keep the indoor receiver out of direct sunlight or the Air Conditioner may malfunction.
• Never mix new and old batteries. Never use different battery types (e.g. alkaline and
manganese dioxide) simultaneously.
G
NOTE!
• If the same time is set for both START and STOPPING settings, the stopping time will
automatically increase 0.5hr (the set time displays less than 10Hr) or one hour (the set time
displays 10Hr or more).
• To change the Timer on/off time, just press the corresponding TIMER button and reset the
time.
• The setting time is relative time. That is the time set is based on the delay of the current time.
man_AAC design 11000_1.qxd 07-03-2008 14:22 Pagina 112
