MANAGEMENT
SYSTEMS
Assessed to ISO 9001:2008
Cert/LPCB ref. 010
Assessed to ISO 14001:2004
Cert/LPCB ref. 010 EMS
MANAGEMENT
SYSTEMS
Cert/LPCB ref. 010
PRODUCT
CERTIFICATION
Apollo Test Set - User Manual
28
Settings
The Settings section of the programmer mode splash screen enables you to adjust the settings of a Discovery or Soteria
device. The available options depend upon the type of device that is fitted to the mounting base.
Mode
To change the device mode, tap the mode
button. A drop-down list appears showing the
available modes.
Tap the mode you require. The drop-down list
closes and the selected mode is shown.
Polling LED
To change the polling status, tap the Polling
LED button. The polling status is changed and
the active status is highlighted blue.
Rapid update
To start rapid update of the device, tap the
‘initiate’ button. The words ‘in progress’
appear, the colour changes from grey to blue
and ‘darkens’ this means that its state cannot
be changed during the update period - 30
seconds. When the update is finished the
button colour returns to grey.
Soft address ( function not available at present)
To change the address of a device, tap the ‘Soft
address’ button. The numeric keyboard splash
screen appears.
Summary of Contents for SA7800-870APO
Page 1: ...Apollo Test Set User Manual 1 Apollo Test Set User Manual...
Page 45: ...Apollo Test Set User Manual 45 Appendix C Loop supply from direction OUT...
Page 47: ...Apollo Test Set User Manual 47 Appendix E Earth fault location search...
Page 49: ...Apollo Test Set User Manual 49 Appendix G Line Voltages...
