MANAGEMENT
SYSTEMS
Assessed to ISO 9001:2008
Cert/LPCB ref. 010
Assessed to ISO 14001:2004
Cert/LPCB ref. 010 EMS
MANAGEMENT
SYSTEMS
Cert/LPCB ref. 010
PRODUCT
CERTIFICATION
Apollo Test Set - User Manual
37
If there is more than one earth fault
detected, the result is shown as either
between an address and the IN loop,
or between an address and the OUT
loop. To find the fault you should check
the loop back from the address that is
given.
How do I enter a location?
The Location function enables you to enter a location where a test has been done.
To enter a location, on the home screen tap
the ‘Location’ tab. This is the tab immediately
below ‘Location’ on the home screen. A drop-
down appears listing all the locations.
Either tap an existing location, or ‘new location’,
an on-screen keyboard appears.
Type in the name of the new location and tap
‘Create’. The on-screen keyboard closes and a
tab with the new location appears in the drop-
down.
When a location is added, the Stored Events,
Data logs tab becomes available for that
location.
Summary of Contents for SA7800-870APO
Page 1: ...Apollo Test Set User Manual 1 Apollo Test Set User Manual...
Page 45: ...Apollo Test Set User Manual 45 Appendix C Loop supply from direction OUT...
Page 47: ...Apollo Test Set User Manual 47 Appendix E Earth fault location search...
Page 49: ...Apollo Test Set User Manual 49 Appendix G Line Voltages...
