●
Action when trouble is found.
Please turn the main switch on.
●
Action when trouble is found.
Please connect the battery connector correctly.
●
Action when trouble is found.
Please recharge your existing battery and try again.
●
Action when trouble is found.
Please dry around two sensor screws that are located on the top of
the bulkhead.
●
Action when trouble is found.
Normal operation can be expected after repair..
Please request your local dealer to repair the scooter if you do not
understand the repair method.
Symptoms : The propeller doesn't rotate even though the accelerator lever is activated.
Water leak alert lamp
Water leak sensor terminal
Check1 : The scooter won't activate.
Check2 : The battery may not be connected correctly.
Check5 : The water sensor may have been activated.
Please advice the dealer that the scooter is not operating even after all the above points were addressed and
checked.
Check4 : Is the battery charged?
Check3 : Can you push the red accelerator unit switch button on the side of the scooter main body down firmly?
●
Please confirm the battery indicator lights are on.
Please go to the following step if the scooter
still does not operate.
Please go to the following step if the battery is
connected correctly.
Please go to the following step if the accelerator
seems to be working correctly.
Please go to the following step if this sequence of
troubleshooting doesn't correspond.
If the symptom still persists after another fully
charged battery has been tried then please
go to the next step.
If the warning lamp has not turned off, or the warning lamp lights up
frequently, the scooter may be leaking.
Please request a full overhaul with your dealer.
●
Please open the head assy and confirm that the battery lead is not connected.
●
Visually confirm the operation of the switch.
●
Please open the head Assy cover, and confirm the warning lamp is on.
●
in case of avx please refer to P. 14
⑤.
22
(All apollo DPV)
