Apollo AV-2 Instruction Manual Download Page 13

Page: 13 / 36

WARNING

CAUTION

●

Altering the battery connector plug in any way is very dangerous and should not

be done. Any alterations will cause unexpected trouble.

●

The battery is quite heavy, so be careful not get your fingers pinched or to

drop it onto your feet.

●

Hold and squeeze the release levers on both sides of the battery connector

plug and pull upwards.

●

Hold the grip of the battery firmly and lift it away from the body.

Place in on a clean and dry flat stable surface.

●

You must use the correct exclusive charger suitable for the type of battery being used.

Please refer to the handling manual that is attached to each product about the battery.

●

The connector is polarized, so when connecting, insert in a direction so it will smoothly enter the connector

receptor.

CAUTION

●

Please do not set the battery into the scooter for at least 30 minutes after completing the charge.

Please do not use if the battery become high temperature.

●

The red is changed into green as the charge progresses.

●

A green lamp shows when the battery connector is not

connected (open circuit) but the power is on.

The color of LED will indicate when charging is completed. LED

Remove the connector

Charging : Red light

Finished : Green light

The battery charger automatically changes into trickle
charge mode after charging is complete.
Please do not keep the trickle charging for
extended period of hours exceeding a day
as it may damage the battery life.

①

At first, turn the power off and remove the

AC plug from the domestic outlet.

②

Next, remove the plug of charger.

■

STEP4

Releasing the battery connector plug.

■

STEP5

Removal of the battery.

■

STEP6

Connecting the exclusive charger to begin recharging.

■

STEP7

Disconnect the charger when charging is completed.

■

STEP8

Charge completion.

Charging time of the charger

①

First, connect the AC (alternating current) plug of the charger to a domestic outlet.

②

Next, connect the socket from the battery to

the plug on the charger.
The charging will automatically start upon
connection after the power is turned on
at the domestic outlet.

AC100~240V

DC29.4V

Summary of Contents for AV-2





































Search results

Summary of Contents for AV-2

Reviews:

Related manuals for AV-2

Brands by name

Popular brands

Apollo AV-2, Instruction Manual

Search results

Summary of Contents for AV-2

Reviews:

Related manuals for AV-2

Brands by name

Popular brands