16
Adjustments
Push Buttons
Jumpers
TIMER TO CLOSE
Adjusts time before gate automatically closes 1-60 seconds.
DUAL GATE DELAY
Adjusts delay between master and slave operation 0-4
(836 only)
seconds. (for use with magnetic and mechanical locks.
or stop tabs)
CURRENT SENSITIVITY
Increases or decreases the Auto Reverse sensitivity.
LED ENABLE
When depressed, activates LEDs for 15 minutes to
assist in installation and troubleshooting.
Hold the push button down for five seconds to put
the board in learn mode.
RESET
Resets the microprocessor. Returns processor to
last known state.
STOP CIRCUIT JUMPER
When the STOP CIRCUIT JUMPER
is connected, the gate will operate normally.
STOP CIRCUIT JUMPER
When a 3-button station is connected to
the board, the STOP CIRCUIT JUMPER
must be removed.
