Apnicure Winx, User Manual, Page: 24 / 60

18
Cleaning the reservoir
To clean the reservoir, you will need to remove it from the console.
Press the reservoir ejection button next to the reservoir on the top of the
console. The reservoir will pop up. Remove the reservoir from the console.
Remove the lid by turning it
counter-clockwise.
Remove the reservoir insert. Empty the reservoir in the sink. Rinse the
reservoir and inside canister with warm water. Thoroughly rinse the inside
of the reservoir lid. Shake
lid gently to remove excess water. Allow lid to
air dry for at least five minutes before replacing the insert and lid.
Replace the lid by turning it clockwise. If water has collected inside the
console where the reservoir sits, wipe dry with a towel. Put the reservoir
back inside the console, and push downward on the reservoir until it
clicks into place.
Note: Wash the reservoir parts by hand only. DO NOT wash the reservoir in the dishwasher. DO NOT
clean the reservoir with strong cleaning agents such as detergents, bleach, ammonia, alcohol, or acids
(e.g., vinegar).

PN 12149-B.indd 18 4/23/13 11:53 AM