AVS-500 Series Machine Vision User Manual
34
Pin4-6:
Power on/off Button
. Use to connect power switch button. The pins are
disconnected under normal condition. You may short them temporarily to realize
system startup& shutdown or awaken the system from sleep state.
Pin9-10:
Buzzer
. Use to connect an external buzzer.
Pin25-40:
USB7/USB8/USB10/USB11
. Front USB connectors with 4 USB2.0 ports via
a dedicated USB cable.
Each USB Type A Receptacle (2 Ports) current value is limited under 2.0A. If the
external USB device current exceeds 2.0A, please separate connectors into
different Receptacle.
Note:
When connecting LEDs, buzzer and USBs, please pay special attention to the signal
polarity. Make sure that the connector pins have a one-to-one correspondence with
the chassis wiring, or it may cause boot up failure.
46. PCIE_4x1 (option):
(4 x 20 Pin Connector) Riser Card expansion connector
It is able to support one PCIex4 or five PCIex1 signal. Both PCI express x1 and PCI
express x4 support GEN1 and GEN2 mode.
Model
PCIe_4x1
ASB-M8172HT
Top
ASB-M8172HB
Bottom
ASB-M8172HB-S
Bottom
Riser Card
Function
ASB-M8172HB
ASB-M8172HB-S
ASB-M8172HT
TB-588P4
PCI slot x 4
●
X
Note:
Please assemble the riser card correct, otherwise it will burn out the
motherboard! If you do not know to assemble, please contact technical support.
47. PCIE_16x1 (option):
(4x30 Pin) Riser Card expansion connector
It supports one PCIex16 or two PCIex8 signal with GEN1 and GEN2 mode.