ATTENTION!!
WHEN YOU SEE A “ WARNING!” BE SURE TO HEED THE MESSAGE!
THE INFORMATION CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!!
READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT(S).
This instruction manual complies with the Treestand Manufacturers Association’s TMS 04 -
Standard Practice for Treestand Instructions
and TMS 02 -
Standard Test Method for Treestand Fall Arrest Systems.
10
MODEL GCL303-A • THE CRUSADER
WARNING! Read Usage Instructions & Warnings and Full-Body Fall Arrest Harness Usage Instructions & Warnings on pages 3-7 prior to the
use of this product! Failure to follow the instructions on pages 3-7 may result in serious injury or death!
THIS PRODUCT COMES FULLY ASSEMBLED; HOWEVER, IT IS ADVISABLE TO REFER TO THE DETAILED DIAGRAM BELOW TO BECOME FAMILIAR
WITH THE PROPER ASSEMBLY OF YOUR TREESTAND.
To unfold your stand, Insert the V-bracket into the rear of the foot section and secure using the secured delta bolt. Repeat for seat section.
WARNING! AFTER BECOMING FAMILIAR WITH YOUR STANDS’ ASSEMBLY, YOU MUST READ AND FOLLOW ALL INSTALLATION
INSTRUCTIONS AND WARNINGS ON PAGES 13-17. FAILURE TO FOLLOW THIS WARNING MAY RESULT IN SERIOUS INJURY OR DEATH!
Secured
Cap Bolt
Foot Section
V-Bracket
Coated
Steel Chain
Snap Pins
Secured
Cap Bolt
Seat Section
V-Bracket
Bark Biters
Coated
Steel Chain
Snap Pins
Tab
V-Bracket
Bark Biters
Seat Section
Support - Right
Seat Section
Support - Left
Foot Section
Support - Left
Foot Section
Support - Right
Parts List (GCL303-A)
Part #
Description
Qty
UP14-0386 Foot Section
1
UP14-0387 Foot Section Support-Left
1
UP14-0388 Foot Section Support Right
1
UP14-0389 Seat Section
1
UP14-0390 Seat Section Support-Left
1
UP14-0391 Seat Section Support-Right
1
UP14-0392 V-Bracket
2
UP14-0384 Coated Steel Chain
2
UP14-0182 Heel Cord
1
UP11-0066 Connector Rope
1
UP11-0067 Accessory Bag
1
UP12-0146 Padded Backpack Strap
2
UP11-0069 Cinching Strap
3
UP11-0089 Armrest Foam
2
UP14-0238 Armrest Cover
2
UP14-0393 Climbing Seat Foam
1
UP14-0394 Climbing Seat Cover
1
UP14-0224 Seat Cushion
1
UP14-0253 Backrest Cushion
1
UP14-0225 Ratchet Strap with D-ring
1
UP10-0037 Cam Buckle Strap
1
UP14-0207 Full Body Fall Arrest Harness B330 1
UP14-0418 Instruction Manual
1
UP10-0660 Treestand Safety DVD
1
UP77-0153 5/16" x 7/8" Hex Bolt
4
UP77-0042 5/16" x 2 1/8" Hex Bolt
2
UP77-0044 5/16" x 2 1/4" Hex Bolt
2
UP77-0031 Steel Washer
16
UP77-0030 Nylon Washer
12
UP77-0029 5/16" Nylock Nut
8
UP77-0141 5/16" Secured Delta Bolt
2
UP77-0123 Snap Pin
4
Min. Tree Diameter
9 Inches
Max. Tree Diameter
20 Inches
Max. Weight Capacity
(USER AND EQUIPMENT)
300 lbs/136 kg
Maximum Occupancy
one (1)
Secured
Cap Bolt
Foot Section
V-Bracket
Coated
Steel Chain
Snap Pins
Secured
Cap Bolt
Seat Section
V-Bracket
Bark Biters
Coated
Steel Chain
Snap Pins
Tab
V-Bracket
Bark Biters
Seat Section
Support - Right
Seat Section
Support - Left
Foot Section
Support - Left
Foot Section
Support - Right
note: V-Bracket installed
underneath the tab.
Snap
Pin
Wrap snap pin wire closure
around front of tubing and
secure over end of snap pin.
Installed and
in the closed
position
You are now ready to install your climbing treestand. refer to Pages 13-17,
Field Installation-Climbing
Treestands
, for installation instructions.