Rev. A1, 3/10
PG5
9
Automation Products Group, Inc.
APG...Providing tailored solutions for measurement applications
Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]
•
Units of Measure (UNITS):
Allows the user to select the unit of measure to be displayed as the pressure
reading.
Options:
For gauges over 120 psi:
PSI
(pounds per square inch)
bAR
(bar)
KPA
(kilopascals)
*CUSTOM
(see “Using Custom Units” on next page)
KGCM^2
(kilograms per cubic centimeter)
MPA
(megapascals)
FTH20
(feet of water @ 60 F)
cmHG
(centimeters of mercury)
For gauges less than 120 psi:
PSI
(pounds per square inch)
bAR
(bar)
KPA
(kilopascals)
*CUSTOM
(see “Using Custom Units” on next page)
mbAR
(millibar)
INHG
(inches of mercury)
INH20
(inches of water @ 60 F)
mmHG
(millimeters of mercury)
Setting the Unit of Measure:
Step 1: Press the On/Off button once to enter the main setup menu.
Step 2: Press (Z) to cycle through the options until UNITS is displayed.
Step 3: Press (S) to access the Units options.
Step 4: Press (Z) to cycle through setting options until the desired unit of
measure is displayed.
Step 5: Press (S) to apply the setting and return to the main setup menu.
