PG5
Rev. A1, 3/10
24
Automation Products Group, Inc.
APG...Providing tailored solutions for measurement applications
Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]
Firmware Release Notes
PG5v100.hex Created 1/20/2009
First Release of Software
PG5V101.hex Created 2/13/2009
-> Updated Zero function to read NOZERO when more than 5% of Full Scale
-> Updated Tare function to read NOTARE when more than full scale and if gauge is in TARE T5 segment instead of T1
and shuts off when greater than full scale
-> Fixed On/Off button on Power Up to wait to be released before going into the Menu
PG5v102.hex Created 3/16/2009
-> Added different sampling rates selectable from the Menu slow,medium,fast
-> Disabled the lo res option for units with no decimal place in reading
-> Fixed Peak Hold to Reset by pushing Select Button to reset the max value to the current reading
-> Fixed the Leading Zeros when Peak Hold enabled and when using the Custom Multiplier in the Menu
-> Locked Menu has peak hold enable/disable with Select button not in Menu, Menu has Units -> lbs,kg, Newton -> Can
Zero Reading Z button
-> Fixed External Power Auto_Off Option and Sampling Rate
-> Fixed ON/OFF Button when Auto_Off enabled it went into the MENU reset the Flag when Auto Off shutdown
-> Reset Auto Off timer every time the Zero or Select Button are pushed.
PG5v103.hex 4/7/2009
-> Added 4 options to setup the analog output from the menu and appear only with ouputs enabled
-> Added fsw to units and changed to lockout all other units when calibration to other unit besides psi
-> Added Bar Graph Zero and Full Scale adjustment to the Menu
-> Added Range adjustment in the Menu
-> Added Modes to Lockout the Menu and give limited access
PG5v104.hex created 4/27/2009
-> Changed how Units are displayed when other than psi only that unit is displayed
PG5v105.hex created 5/27/2009
-> Fixed conversion problems with units ftH20, cmHg
-> Fixed Bar Graph zero and Full Scale to scale to the right pressure
-> Fixed High and Lo Res for the different units and to have a dummy zero for correct units
