Apex Digital XA3300, Parts Manual

Page: 32 / 116

29
Controller Master Display
The XA4000 utilizes a Controller Master Display to communicate with the engine and
other systems on the applicator. This allows for easy adjustments to the agitator pump,
slurry pump and other outputs This display will also alert the operator to any error
messages it detects. This display is mounted in the Operator Control Panel at the
Operator Platform and functions via the touchscreen or the buttons, for gloved use.
Functions that are in, but not limited to, the Controller Master Display:
• Engine RPM
•
Hydraulic oil temperature
• Engine coolant temperature
• DEF level
Warnings that are in, but not limited to, the Controller Master Display:
•
Hydraulic temperature
•
Engine coolant temperature
•
Low engine oil pressure
Home Screen
The Home Screen displays the engine
RPM, hydraulic oil temperature, coolant
temperature, DEF level, the agitator engage
percent and the slurry pump engage
percent.
From the Home Screen, the operator can
access other screens that display pertinent
data along with adjustments to suit the
operator or the specific jobsite.
The Check Engine Lamp (CEL) and Stop
Engine Lamp (SEL) are located on the
Home Screen. Further information on these
lamps is located on the Engine Screen.
Press the START button to start the
engine.
Press the STOP button to turn the engine
off.
Slurry Pump Control
The Pump Control Screen is accessed by pressing the RUN button on the Home
Screen. Press the green PUMP button to engage the slurry pump. Press the PUMP
button to disengage the slurry pump
. Use the TURTLE and RABBIT arrow buttons to
decrease or increase the speed of the engine .
The pump control will default to the minimum setting to avoid accidental discharge of
material at engine startup.