Apex Digital XA3300, Parts Manual

Page: 26 / 116

23
2. Remove the engine dipstick and
check the level. The oil level should
be between the “ADD” mark and the
“FILL” mark. If the oil level is low add
oil through the fill port to the proper
level.
Check Engine Coolant Level
Check the engine coolant level daily before starting the engine. The applicator should be
on a level surface and the coolant should be cold.
1. The coolant reservoir is located in the engine compartment, behind the engine
access door to the left of the ladder.
2. Check that the reservoir bottle is half-full.
3. Fill the coolant through the fill cap, located on the top of the engine radiator.
Never remove the coolant reservoir cap when the
engine is hot. To avoid severe burns, do not
inspect the coolant system or attempt to add
coolant if the engine is hot.
Failure to correct any problem causing a coolant
leak can result in severe engine overheating. Any
coolant leaks should be corrected immediately.
Engine Oil
Dipstick