32
Be sure the boom is aimed at a vacant area free of all
personnel. Pressurized water from the boom could
cause minor to moderate personal injury.
6. Increase the speed of the slurry pump by pressing the UP arrow in the display. Water
should discharge through the boom until clear.
The boom is now purged. Close the boom ball valve.
7. Open the hose reel ball valve and, while securely holding the hose end, open the
remote hose valve. Water should discharge through the hose until it runs clear.
The hose reel is now purged. Close the hose reel ball valve.
8. Open the recirculation ball valve to allow the slurry pump to circulate water through
the system to purge the recirculation circuit. Water should discharge into the tank
until it runs clear.
The recirculation circuit is now purged. Close the recirculation ball valve.
9. Disengage the slurry pump by pressing the “PUMP CTRL OFF” button.
Mixing Materials
Hydroseed material can produce gases that are
harmful or deadly if inhaled. Empty the slurry tank
daily to prevent build-up of these gases.
Do not store material for long periods of time in the
slurry tank. Harmful or deadly gases could result.
Take care not to drop objects into the tank. Failure to
do so could result in minor to moderate personal
injury. Failure to comply could also result in product
or property damage.
Keep operators and bystanders away from moving
parts.
Contact with rotating equipment can cause serious
injury or death.
Do not wear loose clothing or jewelry that could get
caught in the agitator. Contact with rotating equipment
can cause serious injury or death.
After the discharge lines are confirmed to be clear begin adding materials. Begin by
adding the lightest materials first. If using powdered products (lime, seed, tackifiers)
add
Summary of Contents for XA1200
Page 11: ...11...
