23
Verify Lighting
The XA1200 is equipped with a warning beacon light to alert
bystanders. The strobe light has an adjustable pattern for
work area identification. The strobe sequence can be
changed via a button on the bottom of the Operator’s Control
Panel at the Control Station.
TRAINING
BEFORE operating this equipment read the following
guidelines. This will help to you to minimize the hazards
associated with the use of the XA1200 Applicator. Not
all situations will apply to your unit since the applicator
configuration and specific job requirements will vary
considerably.
•
The XA1200 Applicator must only be operated by a
trained and qualified operator who is familiar with the
controls and their use.
•
Read the Operation Section PRIOR to operating the
machine in order to learn how to use the control
devices properly.
•
Be sure you understand the meaning of the
WARNING signs and other CAUTION messages
throughout this manual.
•
Remember the check points and the method for
checking fluid levels.
•
Visually inspect the machine and check the function
of all lighting and instruments before use.
•
Frequently check the instrument panel. Do not
operate the XA1200 Applicator when the display
indicates a malfunction or error.
GENERAL OPERATOR SAFETY GUIDELINES
The following guidelines will support the safe and
Sequence
button
Summary of Contents for XA1200
Page 11: ...11...
