22
Failure to correct any problem causing a coolant
leak can result in severe engine overheating. Any
coolant leaks should be corrected immediately.
Check Hydraulic Fluid Level
Check the hydraulic oil level daily prior to operation. The applicator should be on level
surface and the oil should be cold. Locate the sight glass on the front of the unit, on the
left side of the applicator.
Improper oil type can cause damage to the
hydraulic system and shorten component life. Use
the appropriate oil for your application and
environment and follow the recommended service
intervals.
Fuel/ Water Separator
Drain the fuel/water separator as needed. Depending on
working conditions and fuel suppliers, it is possible for water
to become mixed with fuel. This could be caused by normal
temperature changes throughout the day or a contaminated
fuel source.
1. The fuel/ water separator is located in the engine
compartment, on the left side of the applicator.
2. Loosen the drain at the bottom of the filter housing and
drain the water into a suitable catch basin. Dispose of
properly.
3. Be sure to tighten the drain after servicing to avoid
introducing air into the fuel system.
Refer to the Maintenance section on page – for details on servicing the fuel/
water separator.
Drain
Primer
bulb
Summary of Contents for XA1200
Page 11: ...11...
