Apex Digital 180413, Operation Manual, Page: 8 / 67

7
Introduction
This manual is provided by APEX Machine Group covering the safe operation and maintenance
procedures for Wide Belt Sanders. This manual contains instructions on installation, safety
precautions, general operating procedures, maintenance instructions and parts breakdown. This
machine has been designed and constructed to provide years of trouble free operation if used in
accordance with instructions set forth in this manual. If there are any questions or comments, please
contact either your local dealer or APEX Machine Group who can also be reached at our web site:
www.apexmachinegroup.com or
855-500-7263.
Specifications
Model Number...............................................................................2037M-D
Working Width (in.) ....................................................................................36”
Maximum Thickness (in.)...........................................................................5 ½”
Minimum Part
Length (in.)..........................................................................16”
Table Height from Floor (in.) ......................................................................41”
Main Drive Motors .....................................................20 HP, 3Ph, 230 voltage
Power Feed Motor .............................................................................2 HP, 3Ph
Sanding Belt Size (in.) ..........................................................................37 x 75”
Required Air Pressure (PSI)..................................................................75 to 80
Gross Shipping Weight (lbs.)......................................................4.500 machine
Net Weight (lbs.).........................................................................5,030 machine
NOTE:
The above specifications were current at the time this manual was published,
but because of our policy of continuous improvement, APEX Machine Group
reserves the right to change specifications at any time without prior notice.