Apex Digital 180413, Operation Manual, Page: 19 / 67

18
Keep hands away from the moving conveyor belt.
1. Turn on the conveyor belt.
2. Adjust tracking using the same adjustment
screws that were used for tensioning in
Figure 10.
3. If conveyor belt is moving to the right side,
turn the right screw clockwise. This will
return the tracking toward the left. Conveyor
generally run to the loose side.
4. If the conveyor belt is moving to the left
side, turn the left screw clockwise. This will
return the tracking toward the right.
5. A positioning wheel (Figure 12) has been
provided on the right and left sides of the
conveyor belt to limit the belt tracking. When
adjusting the tracking, the conveyor belt
should be moved until its edge just touches
the positioning wheels.
6.
Allow the sander to run for several minutes
while observing the conveyor belt tracking
and readjust if necessary.
Positioning wheel
Figure 12