7
Step 5.1: Clean and prepare the GPS antenna mounting surface and cable routing area
A. Clean the surfaces where the GPS adhesive and adhesive cable tie mounts attach.
SECTION 5. MOUNT GPS ANTENNA AND ROUTE CABLE
• Avoid placing GPS less than 6" away from
any vertical metal plates, including the back
wall of the cab as it can affect GPS signal.
• DO NOT put tight bends in cable near anten-
na. Let the cables follow a natural path.
Too close to rear of cab (vertical metal)
1-4"
min. 6"
Step 5.2: Attach the GPS antenna
A. Apply loom to the GPS antenna cable.
B. Remove the 3M adhesive backing and place
the antenna in the desired location.
C. Secure cable with zip tie 1-4" from antenna.
D. Apply firm pressure to any adhesive mounted
components for approximately 15 seconds to
ensure optimal adhesion.
Preferred GPS Location:
Top Fairing Bracket
Alternative GPS Location:
On top of dashboard
GPS