Step 7.1: Find or make the cab access hole
A. Use the existing access hole located during the planning
step, or make a 1/2 inch access hole, in the bottom of the
cab to route cables for externally mounted antennas into
the cab.
CAB ACCESS HOLE GUIDELINES
•
Confirm that no airlines, wiring, or other items on the exterior of the vehicle will be damaged when the drill punctures
the floor. Failure to do so may cause damage to the vehicle.
•
The cab access hole should be in a location where stored items or foot traffic won't repeatedly
smash or bend the
cable where it enters the vehicle.
SECTION 7. ROUTE GPS & TPMS ANTENNA CABLES INTO THE CAB
CAB ACCESS HOLE
10
Preferred cabin access hole:
Exisiting grommeted hole
Alternative cabin access hole:
Make 1/2 hole and use provide grommet