22
code HG0141.00GB ed.A-2008
LRP - RAPID PRO and LK - KONDENSA
LRP and LK WARM AIR HEATER
HG140.00_IM_055
HG140.00_IM_052
A
HG140.00_IM_053
HG140.00_IM_054
B
Suspended heater
FOR ALL LRP and LK HEATERS
To install a suspended heater by using chains or threaded bars,
a kit containing supporting pins is available as an accessory; its
code is: G27940. This kit is suitable for all LRP and LK models.
Vertical heater
The heater can be installed with air intake from top to bottom by
requesting the kit code G27940 (installation with chains). The
kit includes the supporting rings and fixing screws.
IT
is important to indicate the vertical configuration (-00V0)
of the suspended unit in the order, which includes the
thermostat protecting against the overheating of the fan
and an additional trap.
Note: To position the suspension hooks correctly, make
sure that the two guide holes on each hook are on the
external edge of the upper panel (or rear panel in case
of vertical installation) as shown in the figures.
DETAIL
A
:
24 screws and 24 toothed washers included in the kit
DETAIL
B
:
Latch
24 screws and 24 toothed washers included in the kit
