8
DAILY OPERATION OF YOUR OVEN
AM35SS
PIZZA FUNCTION
After selecting this function
, the indicator
“
” light up, press PT1 to adjust the weight of
pizza, weight indicator “
” light up.
After selecting the weight, press PT1, “
” lights up,
turn PT1 to adjust the duration.
Press PT2, cooking starts immediately. Press PT1 again to
reset cooking time.
DEFROST BY WEIGHT
After selecting the function
, the indicators
“
” light up, press PT1 to for the program
selection, after selecting the program, press PT1 to adjust
the weight, after adjust the weight press PT1 to adjust the
duration, time shown blinks and “AUTO” displays; after
setting the duration, press PT2 to start cooking. Press PT1
again to reset program.
The appliance will pause after working half of time
pre-set. “
” stops blinking, DSP1 shows the rest defrost
time. DSP2 shows “Turn” blinking, it is off when you open
the door of the appliance. It continues to work when you
press PT2 again.
We can calculate the defrosting time according to
different food and weight, and the microwave power
can adjust automatically to reach the best defrosting
effect. Furthermore, the table beneath offers a guide to
defrosting type of food by weight, which includes weight
level, defrosting time and follow-up time.
Program
Food
Weight (g)
Time (min)
PR 01
Meat
100-2000
2:20-43:30
PR 02
Bird species
100-2500
2:10-58:10
PR 03
Fish
100-2000
2:00-40:00
PR 04
Fruit
100-500
2:36-13:00
PR 05
Bread
100-800
2:25-19:20
DEFROST BY TIME
After selecting Defrost function
, “
” indicators
light up, press PT1 to adjust the cooking time. Press PT1
again to adjust the duration. After setting above, press
PT2, cooking starts immediately. Press PT1 again to reset
cooking time.
The appliance will pause after working half of time preset,
and it stops blinking, defrost function “
”, DSP1 shows
the rest defrost time. DSP2 shows „Turn‟ blinking, it is off
when open the door of the appliance. It continues to work
when pressing PT2 again.
DELAYED START TIME
(AUTOMATIC COOKING)
When PT1 is pressed to define a delayed start time the
corresponding light “
” starts to blink. DSP1 shows the
current time and DSP2 shows “AUTO”. Turn PT1 to the
right or left to change the delayed start time. Press PT2 to
validate the delayed start time. DSP1 shows the delayed
start time you set and DSP2 is has no display when the
appliance is in standby.
Press PT2 for 3 seconds if you want to cancel the selected
function.
PAUSE IN THE PROCESS OF COOKING
You can stop the cooking process at any time by pressing
PT2 or by opening the oven door. In both cases:
Microwave emission is stopped immediately.
The grill is deactivated but is still very hot.
BE CAREFUL AS
DANGER OF BURNING
.
The timer stops and the display shows the remaining
amount of operating time.
If you wish, at this time you can:
Turn or stir the food to ensure it will be evenly cooked.
Modify the process parameters.
Cancel the process by pressing PT2 for 3 seconds.
To start the process, close the door and press PT2.
MODIFYING PARAMETERS
The operating parameters (time, weight, power) can
only be modified when the cooking process has been
interrupted. Proceed as follows:
Turn PT2 to the right or left to change the function.
Press PT1 to activate the parameter modification mode.
“
” indicator starts to blink. Turn PT1 to the right or left
to change the remaining cooking duration.
Press PT1 to validate, the next parameter light starts to
blink. Proceed as described in the active function chapter
to modify the remaining parameters.
Press PT2 to continue the cooking process.
END OF COOKING CYCLE
At the end of the process you will hear three beeps and
the display will show the word “End”.
The beeps repeat every 30 seconds until the door is
opened or PT2 is pressed. The oven returns to the OFF
setting.
