6
FIRST USE/SETTING UP YOUR OVEN
AM35SS
We recommend that you read the instructions in this owner’s manual carefully before use for the best performance and to
extend the life of your appliance, as it will provide you with all the instructions you require to ensure its safe installation,
use and maintenance. Always keep this owner’s manual close to hand since you may need to refer to it in the future.
Thank you.
SETTING THE CLOCK
When the power is on, “0:00” is flashing on DSP1. Turn
PT1 to adjust hour time, then press and turn PT1 to
set and adjust minute time, at last press PT1 again for
confirming.
The appliance uses a 24 hour clock operating system.
Modify the current time: Under the standby mode, press
PT1 for 3 seconds until the current time flashes on DSP1,
then repeat the setting above.
CLEANING THE OVEN FOR THE FIRST TIME
When the oven is used for the first time, it should be
heated to the maximum temperature for long enough to
burn off any oily residues left during the manufacturing
process, which might contaminate foods with unpleasant
smells.
PRODUCT FUNCTIONS
Under the standby mode, all of the functions show
on DSP3 after press PT2. Then turn PT2 to select the
function, and the selected function will be displayed on
DSP3, while the preset cooking time will be displayed
on DSP1 and the preset parameters (microwaves power,
weight) are displayed in alternation on DSP2.
FUNCTIONS
Microwave
Mic grill
Defrost
by weight
Clock
Working time
Mark of weight
Grill
Defrost time
Pizza
Child lock
Delay time
Microwave power
