Apeks NS158000, Owner'S Manual, Page: 78 / 96

78
NAVIGATION
Doc. 12-7969 Doc. 12-7969 r09 (9/22/22) © Apeks (2022)
1. GET CURRENT LOCATION
When get the current location is selected from the menu, the DSX shall initialize the GPS, see above.
There will be a confirmation message when the location is saved to your DSX.
NOTE: Locations will be saved with date and time entries. Custom names can be added via
the Di application.
NOTE: If the location list capacity is full, the warning “SAVED LOCATIONS LIST
IS FULL. THE OLDEST LOCATION WILL BE DELETED. PROCEED?” shall be displayed when
Save Location is selected.
/
41.0338749, 29.1752541
SAVE LOCATION?
/
41.0338749, 29.1752541
LOCATION SAVED
STORE A LOCATION CONFIRMATION
2. WAYFINDER
The Wayfinder feature uses GPS to guide you to a specific point. When Wayfinder is selected from
the GPS Menu, the list of any saved locations shall be displayed with the most recently saved one on
top. The navigational directions will be provided via an interface very similar to the compass feature.
10:56 A
09:39 A
08:54 A
03:45 P
-
-
-
/
WAYFINDER
/
06/15/2020 -
Far Garden
Ras Mohammed
Jackson Reef
04/22/2020
04/22/2020
06/18/2019
CHOOSE A LOCATION
/
27.914322, 34.365322
Far Garden
GO TO LOCATION?
CONFIRM CHOICE
181°
S
CURRENT LOCATION
27.980089
34.624236
SE
TARGET LOCATION
27.914322
34.355322
SW
DISTANCE
228°
TARGET
13.2
MI
to Wayfinder
Menu
return to
Surface Main
WAYFINDER OP MAIN
NOTE: The Wayfinder Op Main shall
replace Compass Op Main while the
Wayfinder Mode is active. When active,
you may go back and forth between
Surface Main and Wayfinder Op Main
by holding the Right button. The Com-
pass Op Main shall be restored again
as the default function after reaching
your selected target location in Way-
finder Mode or you select Exit From
Wayfinder in the Wayfinder Menu.
NOTE: 0.1 km (or 0.1 mi) is the smallest
unit of distance displayed on the DSX
screen. Distance values less than
that will display as 0.1 km (or 0.1 mi).
Continuing on your heading until the
message YOU HAVE REACHED YOUR
TARGET is displayed.