Apeks NS158000, Owner'S Manual, Page: 32 / 96

Doc. 12-7969 Doc. 12-7969 r09 (9/22/22)
32
© Apeks (2022)
CC SURFACE MODE
5. SET MENU
This submenu allows you to setup your DSX preferences.
SET MENU
/ /
SET GASES
SET SP
DIVE SETTINGS
ALARMS
DEVICE SETTINGS
DATE & TIME
DISPLAY SETTINGS
A. SET GASES
Within this submenu you can change the available gas mixes or acces the Oxygen analyzer
feature. Gas CC-6 is permanently assigned to the onboard oxygen cylinder. The user shall be
able to set the remaining 5 CC gases (diluents, CC-1 to CC-5) ON or OFF* and adjust FO2
from 7% to 100% and FHe from 0% to 93%.
NOTE: The current gas cannot be set OFF. If the user tries to do so, the message
“The actual gas cannot be set OFF" will be displayed.
SET GASES
CC-1
CC-2
CC-3
CC-4
CC-5
ON
ON
CC-6
O2 ANALYZER
OFF
OFF
ON
21/00
18/35
25/35
50/00
80/00
100/00
/
TMT 1
TMT 3
NO TMT
NO TMT
NO TMT
TMT2
/
assigned transmitter
gas mix (O
2
/ He)
gas number
see p. 80
gas status OFF/ON/SET
CHOOSE A GAS TO SET OR O2 ANALYZER
SET GASES
/
SET
CC-2
/
ON/OFF/SET
CHANGE GAS STATUS
SET GASES
/
18/40
CC-2
/
O
2
(first 2 digits flashing)
SET OXYGEN PERCENTAGE
SET GASES
/
18/40
CC-2
/
Helium (last 2 digits flashing)
SET HELIUM PERCENTAGE
SET GASES
/
TMT 1
/
CC-2
LINKED TMT
NO TMT or TMT 1 - 6
ASSIGN A TRANSMITTER
NOTE: If you try to assign a transmitter that was already assigned to another
gas the DSX will indicate this and require you to confirm the change.
SET GASES
TMT 1
/
CC-2
LINKED TMT
3000 PSI BATT GOOD
transmitter status
TRANSMITTER CONNECTED