2
Thank you for choosing APEC Reverse Osmosis systems. You now own the
finest reverse osmosis system in America!
Please read and become familiar with the instructions before proceeding with the installation.
Before Installation:
Inspect the system:
Please take the system and all the components out of box. Inspect the system and all the connection fittings
carefully, making sure nothing was damaged during shipping. If any part is cracked or broken, please do
not proceed with the installation and contact APEC or your distributor for an exchange or diagnosis.
Operating Parameter
•
Operating pressure: 30 psi minimum to 85 psi maximum
•
Feed water temperature: 40-100 ºF (4-37 ºC)
• Do not
connect or run
HOT
water through this system.
Basic Terms
GPD = Gallons Per Day (flow rate)
PSI = Pounds Per Square Inch (pressure)
TDS = Total Dissolved Solids (contaminants)
PPM = Parts Per Million (unit used to measure TDS level)
TDS Meter = A digital meter for measuring the TDS level in the water
Copyright:
This manual is copyrighted by APEC Inc. Under the copyright laws, this manual may not be reproduced in any
form, in whole or part, without the prior written consent of APEC Inc. Manual print ver. 1.0, 2017 February.
General Installation/Operation/Maintenance Requirements
• Installation needs to comply with state and local laws and regulations.
• Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfec-
tion before or after system. Systems certified for cyst reduction may be used on disinfected water that may
contain filterable cysts.
• This reverse osmosis system contains a replaceable treatment component critical for effective
reduction of total dissolved solids. The product water shall be tested periodically to verify that
system is performing satisfactorily.
