22
How to Replace Stage-6 Carbon Filter:
Replace this last filter at the same time you replace the stage-4 membrane.
1) Remove the OLD filter:
See Fig. 15G.
Disconnect the output tubing from
point H
and tubing at
point K
. To remove the tubing, push in and hold down on the collet ring square against the fitting.
With the collet held in this position the tube can be removed.
2) Unclip the old filter from the membrane housing and discard the used filter.
3) Sanitize: Use some mild bleach solution to rinse the open ports of the new filter. This is to prevent
contamination.
NOTE:
Only this filter change needs bleach sanitizing.
Do not
apply chlorine/ bleach in any way to
Membrane for it will damage the membrane!
4) Connect New Filter:
See Fig. 15C.
Attach the new filter onto the clips. Make sure the
“FLOW
Æ
”
arrow
on the filter is pointing towards the pure water output direction
.
Reconnect the UV light output
point J
,
to the inlet of the 6
th
stage carbon
point K
. Then, connect the output tubing to
point H
.
5)
Check for leaks!
Fig. 15G
J
K
H
22
How
w
to
to
R
R
eplace Stage-6 Carbon Filter:
:
Re
Repl
pl
a
ace this last filter at the same time
e yo
you
u r
replace the stage-4 membrane.
1) Remove the OLD filter:
Se
Se
e
e
Fi
Fi
g.
1
15G.
Disconnect the output tubing from
point H
and tubing at
point K
. To remove the
tu
tu
bi
bing
ng
,
,
push in and hold down on the collet ring square against the fitting.
With the collet held in thi
his
s po
posi
sition the tube can be removed.
2) Unclip the old filter from the membrane housing and discard the used filter.
3) Sanitize: Use some mild bleach solution to rinse the
e o
ope
pen
n ports of the new filter. This is to pr
prev
even
ent
t
contamination.
NO
NOTE
TE
:
:
O
Only this filter change needs bleach
h s
s
an
an
i
itizing.
Do not
apply chlorine/ ble
lea
ac
h
h
in
in any way to
Me
Memb
mbrane for it will damage the memb
b
ra
r
ne
ne!
!
4)
4) Connect New Filter:
See Fig. 15C.
C.
A
A
tt
ttac
a
h the new filter onto the clips. M
M
ak
ak
e
e
sure the
“FLOW
Æ
”
arrow
on the filter is pointing towards th
th
e
e
pure water output direction
.
Reconne
nect
ct t
th
he UV light output
point J
,
to the inlet of the 6
th
stage car
ar
bo
bo
n
n
point K
. Then, connect the ou
ou
tp
tput
ut
t
t
ub
b
ing to
point H
.
5)
Check for leaks!
Fig. 15G
J
K
H
