English
24
W-APE
With the W-APE wirelwss DMX Transceiver you can control all ape
labs lights as well as the ApeCoin via wireless DMX. As soon as
you have selected „Control Mode DMX“ in the menu of the W-APE
and the W-APE and the ApeCoin are in the same group, the DMX
signal which is present on the transmitter can be transmitted to
the ApeCoins. Wireless DMX always has top priority and prohibits
the control of other radio signals. You can not control the lights by
remote control at this moment!
For DMX addressing or DMX mode setting, proceed as follows:
Wireless DMX via W-APE or W-APP
1. Turn on the W-APE transmitter and make sure W-APE and
ApeCoin are in the same group.
2. Connect the ApeCoin to a USB power source.
3. Pay attention immediately to the display of the W-APE
transmitter! This points to „Remote Config“.
4. Navigate through the menu in the W-APE transmitter using
the left arrow keys and select your respective request such
as „DMX address, DMX mode, etc“.
5. Confirm your selection and change the respective DMX
address
6. The DMX mode can also be changed here. (3,4,8 Channel)
7. After 5 seconds without further pressing of a button, the
