English
1. Activate the remote control by pressing any key. (This is
normally in sleep mode and activates for 5 minutes
when a button is pressed, thereby being able to receive
and not only send radio signals.)
2. Connect the ApeCoin to a USB power source. Watch out
for your remote now!
3. The set group on the remote control flashes. You can
change the group by pressing the Group key.
4. After 5 seconds the group assignment mode will switch
itself off and the ApeCoin will be ready for operation in
the new group.
Groups
Up to 4 groups can be controlled separately or together. Press the
„GROUP“ button to select the group to be controlled. The numbers
1 to 4 are backlit in red and indicate the selected group. By long
pressing the „GROUP“ - key you control all groups at the same
time.
To assign a group to ApeCoin, proceed as follows:
20
