Revision 1.1
04/2019
Document No. D137-011
Page
3
of
4
Custom-length I/O Link cables, as shown below, are available from Aparian. To simplify installation, these
cables are designed to be inserted between an existing I/O Link cable and the I/O rack. These cables are not
supplied with the PMIO Scanner and must be ordered separately.
WARNING:
Connecting the PMIO Scanner to a running application may disrupt the Honeywell
system. Ensure the application is in a safe state before connecting the PMIO Scanner and
associated I/O Link cables. It is also recommended to configure the PMIO in either
Disabled
or
Shadow mode when first connecting to the I/O Link network. Failure to do so may result in
equipment damage, serious injury or death.
STUDIO 5000 CONFIGURATION
NOTE:
The minimum Studio 5000 version that can be used is v21. The PMIO Scanner uses an Add-
On Profile (AOP) for the 1756 Backplane.
The user will first need to install the PMIO Scanner AOP before the module can be added to the Logix I/O
tree. The AOP for the PMIO Scanner can be downloaded from the Aparian website:
http://www.aparian.com/software/aop
. Once downloaded extract the zip file, run the
MPSetup.exe
file, and
follow the on-screen instructions.
