Revision 1.1
04/2019
Document No. D137-011
Page
4
of
4
ADDITIONAL CONSIDERATIONS
TERMS
Honeywell and Rockwell Automation (Allen-Bradley) use different terms and nomenclatures which can
complicate the migration process.
NUMBERING
Honeywell numbering typically starts at 1. For example, the first IO point on an IOP will be 1. Rockwell
numbering typically starts at 0. Care must be taken to adjust for this offset when viewing Honeywell IO in a
Logix system.
NORTH AMERICAN HAZARDOUS LOCATION APPROVAL
SUITABLE FOR USE IN CLASS I, DIVISION 2, GROUPS A, B, C AND D HAZARDOUS LOCATIONS, OR
NONHAZARDOUS LOCATIONS ONLY.
WARNING - EXPLOSION HAZARD - DO NOT DISCONNECT EQUIPMENT WHILE THE CIRCUIT IS LIVE OR UNLESS
THE AREA IS KNOW TO BE FREE OF IGNITABLE CONCENTRATIONS.
WARNING - EXPLOSION HAZARD - SUBSTITUTION OF ANY COMPONENT MAY IMPAIR SUITABILITY FOR CLASS
I, DIVISION 2.
For professional users in the European Union
If you wish to discard electrical and electronic equipment (EEE), please contact your dealer or
supplier for further information.
WARNING –
Cancer and reproductive harm –
www.p65warnings.ca.gov
ADDITIONAL INFORMATION
The following resources contain additional information that can assist the user with the module installation
and operation.
Resource
Link
Slate Installation
www.aparian.com/software/slate
Add-On Profile Installation
http://www.aparian.com/software/aop
ControlLogix Installation
https://literature.rockwellautomation.com/idc/groups/l
iterature/documents/in/1756-in621_-en-p.pdf
SUPPORT
Technical support will be provided via the Web (in the form of user manuals, FAQ, datasheets etc.) to assist
with installation, operation, and diagnostics.
For additional support the user can use either of the following:
Contact Us web link
www.aparian.com/contact-us
Support email
