Apantac KVM-SET-14, Manual

Page: 13 / 16

KVM-SET-14
APANTAC LLC, 10200 SW ALLEN BLVD STE C, BEAVERTON, OR 97005
INFO@APANTAC.COM , TEL: +1 503 968 3000, FAX: +1 503 389 7921
12

Video-Wall Advanced Setup
The Advanced Setup can be used for special effects
which are not included in Basic Setup. There are two
steps in advanced setup:
Step 1: Choose one or more target RXs to apply
setup to.
Step 2: After the targets are selected, changes can
be applied in Step 2.

Reset to Basic Setup:
Reset the target(s) to the setting of “Basic Setup”.

Stretch Type:
Fit In: Stretch the full screen to the whole wall.
Keep Aspect: keeps picture aspect ratio; some image
may spill off screen if needed.

Clockwise Rotate:
0: No rotate
180: clockwise rotate 180 degrees
270: clockwise rotate 270 degrees

Screen Layout (Row x Column):
Define the Video Wall size, select the Row and
Column count from the drop-down menu.

Row Position:
Set the Row position for the selected target RX.
(Rows start from 0)

Column Position:
Set the Column position for the selected target RX.
(Columns start from 0)

Horizontal Shift (Left, Right):
Shift target screen horizontal to left or right in 1 pixel
units.

Vertical Shift (Left, Right):
Shift target screen vertically up or down in 1 pixel
units.

Horizontal Scale Up
Scale up the target screen horizontally, by pixels (1/column count).

Vertical Scale Up
Scale up the target screen vertically (1/row count).