KVM-SET-14
APANTAC LLC, 10200 SW ALLEN BLVD STE C, BEAVERTON, OR 97005
, TEL: +1 503 968 3000, FAX: +1 503 389 7921
10
Serial over IP (TX/RX)
Enter TX/RX Web page ---> [Functions] ---> [Serial over IP] --->
Enable/Disable (default: Enable).
---> [Operation Mode]
Select options of Type 1, Type 2, Type 1 guest mode, Type 2
guest mode (default: Type 2).
Note: Type 1 is mainly for Unicast application where user can
dynamically link with any target RX.
Type 2 is mainly for Multicast application where TX RS-232 will
link with all of connected RXs (default).
Type 1 guest mode is similar to type 1 but using PC to link with
RX’s RS-232.
Type 2 guest mode is similar to type 2 but using PC to link with RX’s RS-232.
For details, please refer to “How to Use RS232 over IP” manual.
---> [Baudrate Setting for Type 2]
Select Baudrate, Data bits, Parity, Stop bits. (default 115200, 8-n-1)
Audio Output (RX)
If the TX’s input audio is in HDMI, you can route the audio output on Line Out of the RX: Enter RX
Web page ---> [Functions] ---> [Audio Output] ---> check “HDMI Audio De-Embedder”. Click [Apply]
to save the setting and reboot. (default Disabled)
IR over IP (RX)
It is possible to assign the IR signal routing path: Enter RX Web page --->
[Functions] ---> [IR over IP] ---> Enable IR over IP (default Enabled)
[IR Assignment]: Select IR routing path from the following 3
[Video Source TX]: Send the IR signals to the video source TX.
[VWall Manager (TX: )]: Send the IR signals to the TX which is assigned by
the VWall Manager software.
[TX IP: ]: Send the IR signals to the manually assigned TX.
Multi-Screen Setting (TX/RX)
The system supports Multi-Screen feature. Each Main TX/RX
can be assigned with 2
nd
, 3
rd
, 4
th
TX/RX IP. When the Main RX
switches to a new Main TX, its associated RXs will also be
switched to the new TX’s associated TXs automatically.
Enter TX/RX Web page ---> [Functions] ---> [Multi-Screen Setting]
---> then enter IP address for the associated 2
nd
, 3
rd
, 4
th
TX/RX IP.
Mirror (RX)
When the “Mirror” option is enabled, the associated RXs will connect to the same TX as the Main
RX is connecting. This splitter function enables multiple RXs to display the same TX.
