IMS Smart Controller
WAN/LAN
P4
P3
P2
P1
POWER
P1-P4 : 1/2-VCC 3-RS485_B 4-RS485_A 5/6-GND 7-C_V
TH
/HV
AL
8-C_ACT/Clean 9-PE(Metal shield)
P1
P2
P4
P3
Red-V
TH
/HV
AL
ACT/Clean-Green
ACT
Wrok/Link
NEXT
SCAN
NEXT
LINK
B
SET
S
SCROLL
T
RJ45
端口
液晶显示屏
2.4G通讯天线
静电传感器监测设置
静电消除器监测设置
静电消除器运行时间设置
无线连接
温湿度显示
WAN/LAN
：
以太网连接端口
POWER：
监控器电源接口
（附带RS485通信）
P1→P4：消电器或传感器
工作状态监控及供电端口
M4安装孔
温湿度探测窗口
ACT：
监控器上电指示，绿灯长亮
Wrok/Link：
网络接通：红灯闪烁，长亮绿灯，
网络断开：红灯闪烁，绿灯熄灭
P1
→
P4：
4路状态指示灯
红灯闪烁：传感器阈值报警/消电器高压报警
绿灯长亮：传感器/消电器上电指示
绿灯闪烁：消电器清洁指示
M4 mounting hole
Temperature and humidity
detection window
2.4G communication antenna
Wireless connection
Temperature and humidity
display
LCD
Monitoring setting of
electrostatic sensor
Setting of operating time of
electrostatic eliminator
Monitoring setting of electrostatic
eliminator
ACI: AC indication on monitor, green light is ON for
long
Network connection: red light flashes and
green light is ON for long
Network disconnection: red light flashes and
green light is OFF.
4-line status indicator light
Red light flashes: threshold alarm of sensor, high voltage alarm of static eliminator
Green light is ON for long: sensor and eliminatorpower on indication
Green light flashes: static eliminatorcleaning indication
Power port of monitor
(attached with RS485 communication)
RJ45 port
Ethernet connection port
Working status monitoring and
power supply port of eliminator or
sensor
Work/Link:
