Take out ion bar, power adapter, power cable, stainless
steel mounting bracket and other accessories from the
packing box and install the stainless steel mounting
bracket on the mounting slot of the ion bar base. Select
the best static discharge position and install the bar body
and the supporting power supply firmly.
Insert one end of the power cord into the socket of the
power adapter, and the other end into the power port on
the bar body. The port wiring information is shown in
the table below.
Bracket installation
Adjustable bracket
The network port power indicator light on and the panel
indicator light green shows ion bar working normally.
Adjust the appropriate voltage output parameters to
output positive and negative ions to neutralize the
electrostatic charge in the space.
1
2
3
Step of use
+
-
OK
CT
TH
PWM
FREQ
CFM
IB
V
IB
N
1
2
3
6
5
4
IB
P
CAL
AL
TH
AP&T
R
Network port cable function information
1
Orange
+24VDC
2 White-orange
+24VDC
3
Blue
RS485+B
4 White-blue
RS485+A
5
Green
GND
6 White-green
GND
7
Brown
HV
AL
：
Eliminator high voltage alarm
8 White-brown ACT
：
Eliminator power-on indication
Clean
：
Eliminator cleaning indication
9 Metal shield
PE
The output wiring diagrams of pins 7 and 8 are as
follows:
AP-DB1223 coding switch
0
：
Pause / modify address
1
：
0.01HZ
2
：
0.03HZ
3: 0.05HZ
4: 0.07HZ
5: 0.1HZ
6: 0.3HZ
7: 0.5HZ
8: 0.7HZ
9: 1HZ
A: 3HZ
B: 5HZ
C: Remote control / terminal control
D: Remote control / terminal control
E: Negative high voltage output (P:95%
、
N:5%-105HZ)
F: Positive high voltage output (N:95%
、
P:5%-105HZ)
Indicator function
Blue light: Infrared adjustment/pause/cleaning indication
Green light: Normal work
Red light: Alarm indication
NPN
function
7: High voltage indication
8: Power-on indication, cleaning indication
Connect to AC
power supply
cable
cable
Network port adapter
Products Use
Step of use/Installation position/Packing accessories
HV Alarm signal:Normal--always
open
、
Abnormal--always close
Power signal :Normal--always close
cleaning signal
:Clean--always open
