11
7. Troubleshooting
Display
Error
Possible cause
No contact to battery
Positive (+) and negative (-)
terminal clips reversed on the
battery.
Short circuit, the terminal
clips are touching or there is a
connection between the battery
terminals.
Measure
Check the cable connection and
connect correctly.
Remove the terminal clips from the
battery and connect them correctly.
Remove the terminal clips from the
battery and connect them correctly.
Check for a metallic object causing the
short circuit between the battery ter-
minals or between the ground strap
and the positive terminal.
8. Maintenance and care
8.1 Maintenance
8.2 Care
9. Notes regarding environmental protection
10. Contact information
The device is maintenance-free if used according to its intended purpose.
Clean the terminal clips every time the charging procedure is completed. Remove splashed battery acid from the
terminal clips to prevent corrosion. Clean the device carefully with a dry cloth. Do not use liquids or chemical clea-
ning agents. Never submerge the device in liquid. Never allow liquid to flow over the device.
Before storing the device, roll up the cables properly in order to prevent damages to the cables and device. Store the
device in a dry and clean location.
The packaging is made up of environmentally friendly materials which may be disposed of via your local
recycling points.
Do not put electrical devices into the household waste. Electrical devices and electronic scrap must be
collected separately and disposed of in an environmentally responsible manner for recycling. Please
contact your local authority regarding disposal options for electronic scrap.
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
www.eal-vertrieb.com