aoyue Ritocco, Instruction Manual

Page: 13 / 14

16
OPERATING GUIDELINES
Standby mode heater “OFF”
(UP button pushed)
ABS Selection heater “OFF”
PLA Selection heater “OFF”
Advanced Selection heater “OFF”
(UP button pushed)
(UP button pushed)
From standby mode to Advanced Mode
Advanced mode heater “ON”
(UP and DOWN button pushed simultaneously)
Stand by mode heater “OFF”
Advanced mode heater “ON”
(Wait for 3 to 6 seconds)
From Advanced mode to Standby Mode
(UP button pushed)
Set temperature = 226 heater “ON”
Set temperature = 227 heater “ON”
(DOWN button pushed)
(UP button pushed)
Set temperature = 226 heater “ON”
13
OPERATING GUIDELINES
Standby mode heater “OFF”
(UP button pushed)
ABS Selection heater “OFF”
ABS mode heater “ON”
(wait for 3 to 6 seconds)
From standby mode to ABS
From ABS mode to Standby Mode
ABS mode heater “ON”
(UP and DOWN button pushed simultaneously)
Standby mode heater “OFF”
(UP button pushed)
ABS mode heat level 1 heater “ON”
ABS mode heat level 0 heater “ON”
(DOWN button pushed)
(DOWN button pushed)
ABS mode heat level –1 heater “ON”
ABS mode heat level –1 heater “ON”
(wait for 3 to 6 seconds)
16
OPERATING GUIDELINES
Standby mode heater “OFF”
(UP button pushed)
ABS Selection heater “OFF”
PLA Selection heater “OFF”
Advanced Selection heater “OFF”
(UP button pushed)
(UP button pushed)
From standby mode to Advanced Mode
Advanced mode heater “ON”
(UP and DOWN button pushed simultaneously)
Stand by mode heater “OFF”
Advanced mode heater “ON”
(Wait for 3 to 6 seconds)
From Advanced mode to Standby Mode
(UP button pushed)
Set temperature = 226 heater “ON”
Set temperature = 227 heater “ON”
(DOWN button pushed)
(UP button pushed)
Set temperature = 226 heater “ON”
13
OPERATING GUIDELINES
Standby mode heater “OFF”
(UP button pushed)
ABS Selection heater “OFF”
ABS mode heater “ON”
(wait for 3 to 6 seconds)
From standby mode to ABS
From ABS mode to Standby Mode
ABS mode heater “ON”
(UP and DOWN button pushed simultaneously)
Standby mode heater “OFF”
(UP button pushed)
ABS mode heat level 1 heater “ON”
ABS mode heat level 0 heater “ON”
(DOWN button pushed)
(DOWN button pushed)
ABS mode heat level –1 heater “ON”
ABS mode heat level –1 heater “ON”
(wait for 3 to 6 seconds)