16
BASIC TROUBLESHOOTING GUIDE
PROBLEM 1: THE UNIT HAS NO POWER
1.
Check if the unit is switched ON.
2.
Check the fuse. Replace with the same type if fuse is blown.
3.
Check the power cord and ensure there are no disconnections.
4.
Verify that the unit is properly connected to the power source.
PROBLEM 2: PANEL DISPLAYS “ ” MESSAGES
DESCRIPTION:
Display show
“ ”
A — Temperature probe A not detected
b — Temperature probe b not detected
C — Temperature probe C not detected
F— Solder Iron not attached.
SOLUTION:
Turn off power and back on. Check the connection of externals
sensors, Top heater tool and solder iron, connect plugs properly into its
receptacle. Check if the temperature probe tip is still intact.
PROBLEM 3: DISPLAY AND OTHER DEVICE OPERATION
ISSUES
SOLUTION:
Turn off power and back on.
OTHER PROBLEMS NOT MENTIONED:
Contact the vendor.
AOYUE TONGYI ELECTRONIC EQUIPMENT FACTORY
Jishui Industrial Zone, Nantou, Zhongshan City, Guangdong Province, P.R.China
www.aoyue.com
Copyright © 2010 Aoyue Tongyi International Ltd.
Game Console Reworking System
Int732
INSTRUCTION MANUAL
Thank you for purchasing Aoyue Int732 Game Console Reworking System.
It is important to read the manual before using the equipment.
Please keep manual in accessible place for future reference.
This manual is designed to familiarize the technician with
the proper operation and maintenance of the equipment.
The “Care and Safety Precautions” section explains the
hazards of using any type of soldering or reworking device.
Please read carefully and observe the guidelines in order to
maximize usage and minimize the risk of injury or accidents .
aoyue
®
