-17-
Calibrating the Compass
After pairing operation, the LED lights of the drone are sharp-flashing, that
mean is begin compass calibration.
Step 1:
Now, the APP interface displays the diagram. Hold the drone horizontally
and rotate the drone in approx 3 complete circles. When completed the
transmitter sends out “Beep” sound and LED lights of drone flash slowly.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Front lights
Rear lights
flash rapidly
flash slowly
+
-
Pairing
After connect the WiFi signal between smart phone and drone. Turn on
the switch on the transmitter. Once the transmitter sends out “Beep” sound,
it means that the drone has been successfully paired with the transmitter.
