+
-
+
-
-08-
•Return to Home
Press the button to start the RTH, the transmitter makes “beep beep”
sound per 1.5 seconds and the drone will fly back to the recorded Home
Point.
Press the RTH button again to exit RTH procedure and regain control of
the drone.
•Photo/ Video
•Speed Switch
Press the button “ ” on the Controllor and you will hear a beep, which
means the drone is at the low speed.
Press the button “ ” again and you will hear two beeps, which means
the drone is at the high speed.
•GPS Mode Switch
•Unlock/Lock
Press the button and the camera icon “ ” on the Controllor, the
camera takes one photo.
Press the same button, the video icon “ ” on the Controllor, the
camera will take the video. Press again will exit shooting.
When turning on the transmitter, the default mode is the GPS Mode. Turn
off GPS by press GPS switch. Check the icon “ ” on the App interface to
confirms GPS status.
Low speed is default setting before speed change.
Press the button ” “ then the motor will rotate.
Pull the Left Joystick to the bottom position. The motor will stop rotating and
the drone will be locked.
