-21-
Smart RTH
Return to Home (RTH)
· The Return to Home function brings the drone back to the Home
Point.
· The Home Point is the location at which the drone takes off. This
location will be recorded as the Home Point.
Failsafe RTH
If the GPS signal is available and the indicate
“Equipment connected (GPS
Model)”
in the APP interface, the home point is recorded previously. Failsafe
Return will be triggered if the controller signal is lost for more than 6
seconds. The drone will automatically start the return procedure and it will
fly back to the Home Point. You can exit “Failsafe RTH” mode by pressing the
“Return to Home” button or pushing the Throttle Joystick if the controller
signal is recovered.
· During the Failsafe Return procedure, the drone cannot avoid
obstacles.
· The drone cannot Return to Home if the GPS signal is weak (satellites
number less than 7).
If the GPS signal is available and the indicate
“Equipment connected (GPS
Model)”
in the APP interface, the home point is recorded previously, press
the “ ” button on the controller, then the drone will fly back to the Home
Point.
Exit the RTH mode by pressing the “ ” button again.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
