+ -
+ -
-08-
•Return to Home
Press the button to start the RTH. The controller emits a “beep-beep”
sound every 1.5 seconds as the drone flies back to the recorded Home
Point.
Press the RTH button again to exit RTH procedure and regain control of
the drone.
•Photo/Video
•Speed Switch
Press the button “ ” on the Controller and you will hear a “beep”,
indicating the drone is at low speed.
Press the button “ ” again and you will hear two beeps, indicating
the drone is at high speed.
•GPS Mode Switch
•Unlock/Lock
Press the button and the camera icon “ ” on the Controller, the
camera takes one photo.
Press the same button, the video icon “ ” on the Controller, the
camera will take the video. Press again will exit shooting.
When turning on the controller, the default mode is the GPS Mode. Turn off
GPS by pressing GPS switch.
Low speed is the default setting.
Press the button ” “ then the motor will rotate.
Pull the Left Joystick to the bottom position. The motor will stop rotating and
the drone will be locked.
