20
4-5-2 Gas test function
In TIG mode, press the ‘parameter adjustment knob’ and ‘TIG/SMAW’ buttons at the
same time for 5 seconds, the panel displays "GRS", perform the same operation to exit
the gas test function.
.
Fig. 4-5-2: Gas test function
4-5-3 Reset to factory setting
Press and hold the selection knob and 2/4 step button at same time for 5 seconds to
reset to factory setting (Fig. 4-5-3).
Fig. 4-5-3: Reset to factory setting
4-6 Interface
Fig. 4-6-1: Front panel
Fig. 4-6-2: Rear panel
