16
Spot weld mode(only ATIG315/400/500P-C welding machine has this function,please
refer to the sub menu)
Fig. 4-3-8: Spot weld mode
2.CC/PULSE button
on “TIG”: switch between “Constant” DC TIG and “Pulse” DC TIG;On “SMAW”: switch
between “Amp” Display and “Volt” Display, the indicator will light up accordingly.
3.TIG/SMAW button
press this button to switch between TIG and SMAW, the indicator will light up
accordingly.
4.Displayer
When the welding power supply is working properly, it displays the welding current and
the value of each parameter. When the welding power supply is abnormal, the
corresponding fault code will be displayed and shut down automatically.
5.Power indicator
lights up if power source is effectively connected to power supply.
6.Protection indicator
The indicator is yellow; it doesn’t light on when working normally. Welding machine
stops welding automatically while in overheat or water insufficient, and the indicator is
on.
7.Welding parameters:
Fig. 4-3-9:Welding power source parameter
