18
Table. 4-4-1: ATIG***P Sub menu parameters list
Table. 4-4-2:ATIG***P-C Sub menu parameters list
4-4-2 Enter and exit sub menu
Press and hold the selection knob and TIG/SMAW selection button at same time for 5
seconds to enter the sub menu interface, Adjust the parameter selection knob to select
the parameter,adjust the parameter adjustment knob to set the value of the parameter.
ATIG***P parameter
Code
Description
Factory
Setting
Gas test function
(First selection TIG mode)
P50/P51
P50 - no gas test function,
P51- gas test function
P50
Tungsten diameter
selection
P0.8-6.0
Tungsten diameter range
P0.8-P6.0
P2.0
ATIG***P-C
parameter
Code
Description
Factory
Setting
Remote/Local
control
F00/F01/
F02/F03
F00-Local control,F01-Analog remote
Control,
F02-Digital remote control,F03- Group
Control
F00
Reserve
F10/F11 F10/F11
F10
Trigger operation
mode
FF0/FF1/
FF2/FF3
FF0-2 STEP;FF1-4 STEP;
FF2-Repeat welding;FF3-Spot welding
FF0
Arc ignition function FHy/FHn FHy-HF,FHn-No HF
FHy
Pulse frequency
selection
F-L/F-H F-L: Pulse frequency range: 0.2-20Hz;
F-H:Pulse frequency range: 20-500Hz;
F-L
Gas test function
F50/F51 F50 - no gas test function, F51- gas test
function
F50
Tungsten diameter
selection
P0.8-6.0 Tungsten diameter range P0.8-P6.0
P2.0
Spot welding time
setting
H0.5-H5.0 Spot welding time range H0.5-H5.0
H2.0
SLOW/FAST
operation
FSL/FSA FSL:all parameter can adjsut;(SLOW )
FSA:only current can adjust.(FAST)
FSL