5
1 PC CONTROL
1-1 USB (UNIVERSAL INTERFACE BUS)
Connect a PC to the AR5001D using one of the remote control connectors.
The USB (type B) connector is designed to connect directly to the USB port of a PC and AUX 1
connector is to connect to an RS-232C serial port of a PC.
The default setting is USB.
All functions of the AR5001D can be controlled by a PC.
1-1-1 USB DRIVER
Before connecting the AR5001D to a PC, the USB driver for the AR5001D needs to be installed.
The USB driver can be downloaded from the manufacturer’s website. (Shown Below)
http://www.ftdichip.com/ftdrivers.htm
Click “VCP Drivers”, then select the device name “FT232B”.
The following are the specifications for the communication protocol.
Communication speed: 115,200 bps (default), 57,600 bps, 38,400 bps, 19,200 bps, 9,600 bps
Data: 8 bit
Stop bit: 1
Parity: None
Flow control: None or RTS/CTS
Echo: Off
Return Code: (PC
AR5001D): <CR><0x0d> <LF> ignore
Return Code: (AR5001D
PC): <CR><LF>(0x0d, 0x0a)
1-2 AUX 1
The AUX 1 is a serial port using an RS-232C cable terminated in a 9-pin connector.
The following are the specifications for the communication protocol.
Communication speed: 115,200 bps (default), 57,600 bps, 38,400 bps, 19,200 bps, 9,600 bps
Data: 8 bit
Stop bit: 1
Parity: None
Flow control: None or RTS/CTS
Echo: Off
All manuals and user guides at all-guides.com
